What are the essential configuration steps required at the user end to integrate biometric devices with ADDA?

To successfully configure a biometric device with ADDA, follow these detailed steps:

• Step 1: Navigate to MENU.

• Step 2: Select COMM.

• Step 3: Click on ETHERNET.

• Step 4: Enable DHCP.

• Step 5: Check the IP address (Device status is ON if the IP address is unchanged; otherwise, it's OFF).

Now, return to the MENU screen of COMM and continue:

• Step 6: Choose ADMS/-Cloud Server Settings.

• Step 7: Turn on the Domain Name.

• Step 8: Enter the server address as "apartmentadda.com

• Step 9: Click on SAVE.

• 
  

• 
  

• Note: It is crucial to disable the proxy during the configuration process to ensure seamless integration of the biometric device with ADDA.
  

• Related Articles

• What is the process for enrolling a new user on a biometric device to ensure their attendance is reflected on ADDA?

  Please follow the below steps to enroll a new user on a biometric device: Step1:-Go to MENU Step2:-Select User Management Step3:-Select New User Step4:-Enter User ID ( Enter the same badge number of staff which is same on ADDA) Step5:-Then OK ...

• What is the process of integrating a biometric device with ADDA and Its benefits?

  To connect the biometric device with ADDA, customers are required to contact support@adda.io, and the team will respond promptly. Additionally, please purchase a compatible device for seamless integration with ADDA. This integration brings the ...

• What are the Biometric devices compatible with ADDA?

  The following are the devices that are compatible with ADDA: ESSL X990 , ESSL uface602 , ESSL uface302 , ESSL uface800 , Zktech uface 800

• The biometric device is online, but entries are not being recorded/Synced with the Gatekeeper app.

  Please raise a support ticket if your biometric is visible online under staff Manager >> Device Management. Below is the email address to quickly raise the ticket. Support ID : support@adda.io Please rest assured we will fix this problem ASAP, ...

• Staff marked attendance through the biometric, but it doesn't reflect on the ADDA portal. What could be the issue?

  The user needs to check the staff badge number, if the badge number differs the attendance will not be synched up in ADDA. and the Biometric device should be ONLINE ( Admin >> Staff Manager >> Setup >> Device management).