Quick steps to set up your ADDA

Quick steps to set up your ADDA

Capture

Configure Users:

From here, you can start adding the new users (owners/tenants/caretakers/staff) to your ADDA.

Step 1: Add users through the Mass upload template or else one by one.

Go to Admin >> Configuration Hub >> User & Flat >> Users >> Add Users >>

For mass upload: 
i. Scroll down the page and download the excel template present under the Mass Upload section.
ii. Fill the rows with resident information like Name, Block, Flat No., Mobile No., Intercom, User Status-Owner/Tenant & Email id.
iii. Upload the filled template. The data shows up under the Add Users section. The residents have not yet been added to your ADDA.
iv. You can edit or modify the records and once you are satisfied click Create User Accounts.

For adding users one by one: Fill in the user information and then Create user account.

In case a new Block is to be Added click on Add more blocks.

Step 2: Setup Access Control

Go to Admin >> Configuration Hub >> User & Flat >> Users >> Access Control >>

Setup Management Committee access:
i. Select the User from the Drop Down who needs admin access.
ii. Checkmark the relevant application where access is required and Save Changes.
iii. Tick Is Committee Member Checkbox and enter Designation if applicable and Save Changes.

Setup Office staff account and define their access level:
i. Click on Add a Staff and fill in the necessary details.
ii. Click Create Manager Account. The page will refresh and you can see 2 rows – first row with the manager name and the list of Resident applications and second row with the manager name and list of Admin applications.
iii Click on the check-boxes of the applications you want to give access to the manager and Save.
iv: Click Inform and this will send out an email invitation with login credentials to the staff.
Click here know more in detail: http://faq.adda.io/how-to-add-non-residents/

Setup Caretaker if any:
​In some of the rented Flats or Villas, the owners might have delegated the responsibility of overseeing the property to Caretakers. These Caretakers make sure the maintenance dues are paid on time, complaints are raised and serviced, and all important Notices are acted upon on behalf of the Owner.
i. Click on Add a Caretaker, fill in the necessary details and Create Caretaker Account.
ii. Click on the check-boxes of the applications you want to give access and Click Inform. The user will be sent an email with their login credentials.

Setup Custom Email Forwarding if required:
You have email addresses like secretarysharlow@apartmentadda.com - and you can map it to the email address you want. Next year when the MC committee changes, this can be updated.

Step 3: Send Invites 

From here you can send invites with login credentials to all those users who have not yet logged into ADDA.
i. Go to Admin >> Configuration Hub >> Users >> Statistics.
ii. You can edit the invitation email that goes to the residents through “Edit Invite Template”.
iii. Now Click Bulk Invite (Only Email).
Keep sending the Bulk Invites until all the users have logged in.
You can also filter user's data like a list of Owners, Tenants, Users having admin access, Users with invalid email id, Users with no mobile, etc.

Step 4: Approve users awaiting approval if any.

i. Go to Admin >> Configuration Hub >> Users >> Unapproved
ii. Click the EDIT button to view the user details.
iii. Once verified & validated you can approve the user by Check Mark the Approve check-box and click on Approve Selected users button.
Once approved, the user will be informed via email automatically with a temporary password. You can check the user under the Approved users list.
Note: If Move In-Out tracker is setup, Please validate the user details from EDIT >> ADVANCED

Configure Flats:

Step 1: Go to Admin >> Configuration Hub >> Flats >> Click ADD Missing Flats if any more flats are to be added & Save Changes.
Step 2: Assign the individual flats to respective Flat Categories if any.
Step 3:  Assign the primary contacts for the flats added.

Configure Parking Data:

Using Parking Manager admin can track all Vehicles, Parking Slots, and RFID Tags in one place.  Also gets the list of all allotted and Un allotted parking Slots.
To Setup parking slots of your apartment:
i. Go to Admin >> Configuration Hub >> Parking
ii. Click on the “Add Slot” button and enter the required details.
Once the parking slots are added, either the user or admin can update the vehicle details.
In case you want us to do the bulk upload of your vehicle data please raise a support ticket.
Click here to know more in detail: http://faq.adda.io/category/admins-dashboard/parking-manager/

Configure Move In/Out Tracker:

This module helps to set up a workflow for tracking Move Ins and Move Outs.
Admin needs to setup following forms and checklists, before enabling Move IN/Out workflow for your ADDA:

Step 1: Setup Move IN form.
i. Go to Admin >> Configuration Hub >> Move IN/OUT Tracker >> View All >> Setup >> Move-In Form User
ii. Mark the checkboxes to enable any field to appear on the move-in form.
Note: Can add additional fields as per your requirement in the empty text boxes provided at bottom > select its data type (text, date, Single option, Multiple option-can enter multiple values separated by comma)
iii. Select the field applicable to the only owner, tenant or common for both
iv. Click Save Changes
FYI: Click View form to get a preview of Move IN form that you have setup.
v. Check-mark the “Enable advanced Move-In workflow

Step 2. Setup the Move-In Checklist.
i. For doing the setup, go to Move IN/OUT Tracker >> View All >> Setup >> Move-In Checklist.
ii. Add a checklist field and click on “Add entry to Move In Check List
iii. Enable the field added by marking the check-box beside the field.
iv. Click Save Changes

Step 3. Setup Move Out form.
i. Go to Move IN/OUT Tracker >> View All >> Setup >> Move Out Form
ii. Customize the Form (Refer Move-In form methodology for adding the fields)
iii. Click Save Changes

Step 4. Setup Move Out Checklist.
i. Go to Move IN/OUT Tracker >> Setup >> Move Out Checklist
ii. Add a checklist field and click on “Add entry to Move out Check List
iii. Enable the field added by marking the checkbox beside the field.
iv. Click Save Changes.

Click here to know more in detail: http://faq.adda.io/category/admins-dashboard/move-in-out-tracker/

Configure Helpdesk:

HelpDesk Tracker is the Online Complaint Register of your Society. Here all Tickets can be viewed and acted upon by the admin. Driver for each Ticket can be assigned, status can be changed with relevant notes. Tickets can be automatically escalated if it is not acted upon within a set timeframe.
The HelpDesk Tracker comes with some default categories, so users can lodge HelpDesk Tickets readily.
Step 1:  Setup your HelpDesk Tracker
i. Go to Admin >> Configuration Hub >> HelpDesk >> SetUp. Create the HelpDesk Categories that are relevant to your Apartment Complex.
ii. For each HelpDesk Category, provide a Category Owner Level1. This is the User who will get an Email/SMS whenever a ticket of this category is lodged.
Note: Only those users who have access to the Helpdesk Tracker module will be listed in the drop-down.
iii. Scroll to the bottom to setup Notification options and Save

Step 2: Set up the Escalation Matrix:
You can set up Multi-Level Escalation here. An Email will go to higher Levels if the ticket has not been updated in the requisite number of days.
i. Go to Admin >> Configuration Hub >> HelpDesk >> Escalation.
ii. Click EDIT on the category, you wish to do the escalation setup. A separate window pops up.
iii. Provide the L1 Owners, in Shift 1, Shift 2 & Shift 3 if staff or the admin is working on the tickets during specific timings. Select the shift timings. Also checkmark the option Owner 1Send SMS? This will trigger an SMS as and when a ticket is registered for this category.
iv. Under Escalation to Level 2 provide L2 owners. Two L2 owners can be selected. Mention the No. of days the ticket should be escalated. You can checkmark the option Owner 2Send SMS? This will trigger an Email/SMS escalation of the ticket at 9.30 AM.
v. Same as in Step 3, you can set Escalation to Level 3 and Save.
Now your Helpdesk Tracker is set and ready for the users to start lodging their complaints.

Configure Facilities & Activities:

Step 1: Setup Facility
The facility can be the services/benefits availed by the residents by booking them in advance. Facilities can be Ladder, Clubhouse, Function Hall, Swimming Pool, TT court, Gym, etc.
i. Go to Admin >> Configuration Hub >> Facilities & Activities >> Setup Facility.
ii. Click Add Facility, enter the required Facility details and Update Facility.
iii. Update the setup notifications.
Now you can book the facilities added from Resident >> My ADDA >> Facility Booking.

Step 2: Setup Activity
This feature can be used to showcase all the activities like classes or festival events happening in your complex with the residents. Admin can set up both Regular or One-time activities and the residents can have a quick look of the activities happening in the complex in a calendar view.
i. Go to Admin >> Configuration Hub >> Facilities & Activities >> Setup Activity.
ii. Click on Add Activity, enter the required Activity details and Add Activity.
Now you can view the activities added from Resident >> My ADDA >> Activities.

Configure Public Page:

Every ADDA has a public-facing Website showing its Location, Amenities and Contact detail. This Website can be customized from here.
Step 1: Go to Admin >> Configuration Hub >> Public Page
Under Home Tab, update Welcome message for outsiders, instructions for owners/tenants to join your ADDA, status of your Project (if it is under construction), etc.
Step 2: Under Images Tab, upload up to 6 images of your choice that will be shown as a gallery on the landing page.
Step 3: Under Location Tab, map the location of your society which will show on the landing page. Here you can update the Address, Association Name, Url, Amenities, Latitude, and Longitude, etc.

Configure Tasks: 

Tasks can be used to assign work to any committee member, Office Staff or resident.
Step 1: Admin >> Configuration Hub >> Management Apps >> Tasks
Step 2: Enter task categories like Housekeeping, Parking, Data management, etc.
Step 3: Click ‘Save changes’.
Henceforth you can assign tasks through Projects, Meetings & Tasks module.
To know more click here: http://faq.adda.io/how-to-set-a-recurring-task-assign-it-to-the-concerned/

Configure Asset & Inventory:

Step 1: Setup Asset categories
Information on capital assets can be stored here. Like Asset name, tag number, purchase price & date, scanned documents, Service providers contact detail, Service History of this asset, etc. Also, Email or SMS alerts can be set up for preventive maintenance appointments, renewal of AMC contracts, etc.
Setup Asset Categories like Sports Equipment, Electrical Devices, Housekeeping, Gardening Tools, Lifts, Water Pipes, etc. and Save Changes.
To know more click here: http://faq.adda.io/how-to-add-assets/
In case you want us to do the bulk upload of your asset data please raise a support ticket.

Step 2: Setup Inventory categories

Records of your society’s day to day consumables can be maintained here. Admin can track additions and removal of Inventory, by date and user.
Setup Inventory Categories like Water, Diesel, Coolant, Writing pad, Bulbs, Paint, Ceiling Fan, Cable Wire, etc. and Save Changes.
To know more click here: http://faq.adda.io/how-to-track-the-inventories/

 Configure Notice Manager:

A notice posted through the Resident page will be published online post admin approval. Notices awaiting approval can be managed from this application.
Step 1: Setup Notice categories. Ex- Notice for Sale or Notice from Admin.
Step 2: Setup Notice posting charges (if any).
Step 3: Enter the number of days the notice should be active for the resident’s view. (Old notices get stored under the separate header)
Step 4: Set notice categories as ‘member notice’ or ‘non-member notice’.
Step 5: Under Access Control, enable required tabs for specific admins.

To know more click here: http://faq.adda.io/category/admins-dashboard/notice-manager/

Configure Staff:

Setup staff Categories like Cook, Maid, Driver, Tutor, etc. and Save Changes.
To know more click here: http://faq.adda.io/category/admins-dashboard/staff-manager/
In case you want us to do the bulk upload of your staff data please raise a support ticket.

    • Related Articles

    • How to set passcodes for each security?

      Do you have more than one security at the gate? Please follow the below steps to set a unique passcode for each security: Log in to ADDA>> Admin>> ADDA Gatekeeper>> Setup>>Scroll down>> Setup Gatekeeper Passcode. Enter the name of the security and ...
    • I do not wish to receive ADDA discussions by Email. How do I set my preferences?

      Please follow the below steps to set up Email notification preferences  : 1. Login to your ADDA 2. On MyADDA , you will find  Hello < Name > on the top right hand corner of the page. 3.Upon clicking on < Name > , you will find option  : Edit ...
    • Quick reference to invoicing setups/modifications.

      Please follow the below steps in case you are looking to set up a new invoicing formula for raising invoices automatically for next quarter/month/half-year/year: Step 1: Login to ADDA and go to Admin >> Income Tracker >> Setup. Step 2: Set Frequency ...
    • How To Set up Gatekeeper App and ADDA App Notification?

      Are you new to ADDA Gatekeeper? Do you want to know how to configure the settings before using GateKeeper? Below are the few steps that will help you configure ADDA GateKeeper for your society: Login to ADDA>>Admin>>ADDA GateKeeper>>Setup>>Select the ...
    • How can I set automatic meeting alerts for all attendees?

      Follow the steps below to set automatic alerts for all attendees:  1. Go to Admin >> Projects & Meetings >> Meetings 2. Click on 'Create Meeting' button or 'Edit' in case of existing meeting. 3. Scroll down. Here you can see option to 'Send Alert ...